LG Electronics LH-T1000 owner manual Connections Connecting to a TV, Video connection

Connections

Connecting to a TV

Make one of the following connections, depending on the capabilities of your existing equipment.

ips

Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD receiver. Use one of the connections described below.

Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

–Make sure the DVD/CD receiver is connected directly to the TV. Select the correct AV input on your TV.

–Do not connect your DVD/CD receiver to TV via your VCR. The DVD image could be distorted by the copy protection system.

Video connection

1	Connect the MONITOR OUT jack on the DVD
	Receiver to the video in jack on the TV using the
	video cable supplied (V).
	Connect the Left and Right AUDIO OUT jacks of
2 the DVD/CD Receiver to the audio left/right in jacks
	on the TV (A) using the audio cables.
S-Video connection
1	Connect the S-VIDEO OUT jack on the DVD/CD
	receiver to the S-Video in jack on the TV using the

S-Video cable (S).

2 Connect the Left and Right AUDIO OUT jacks of the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the audio cables.

Component Video (Color Stream®) connection

1 Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the DVD/CD receiver to the corresponding in jacks on the TV using an Y Pb Pr cable (C).

2 Connect the Left and Right AUDIO OUT jacks of the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the audio cables.

Progressive Scan (ColorStream® pro) connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/CD receiver’s progressive scan output for the highest video resolution possible.

If your TV does not accept the Progressive Scan for- mat, the picture will appear scrambled if you try Progressive Scan on the DVD/CD receiver.

1 Connect the COMPONENT VIDEO OUT/ PROGRESSIVE SCAN jacks on the DVD/CD receiver to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).

2 Connect the Left and Right AUDIO OUT jacks of the DVD/CD receiver to the audio left/right in jacks on the TV (A) using the supplied audio cables.

ote

–Set the Progressive to “On” on the setup menu for progressive signal, see page 17.

PREPARATION

9