SAFETY 5
WARNING
•The information in this manual should be followed exactly.
-A re or electrical shock may result causing property damage, personal injury or death.
PREPARE TO INSTALL THE RANGE
TOOLS NEEDED
Phillips Screwdriver | Level |
ENGLISH
WARNING
•Any person should not step or
sit on the oven door. You should install the
-The range could be tipped and injury might result from spilled hot
liquid, food, or the range itself.
- If the range is pulled away from the wall for cleaning, service, or any other reason, ensure that the Anti- Tip Device is properly reengaged when the range is pushed back against the wall. Broiling beyond recommended cooking times.
CAUTION
•You should put on gloves during the installation procedure.
-Failure to do so can result in bodily injury.
Adjustable Wrench | ||
Screwdriver | ||
|
1/4” Nut Driver
Drill
Pliers
Safety Glasses
Tape Measure
Pencil | Gloves |
PARTS PROVIDED
NOTE
•Read all instructions contained in these installation instructions before installing range.
•Remove all packing materials from the oven compartments before connecting the electrical supply to the range.
•Observe all governing codes and ordinances.
•Be sure to leave these instructions with the consumer.
NOTE
Keep these instructions with your owner’s manual for future reference.
•As when using any appliance generating heat, there are certain safety precautions you should follow.
•Be sure your range is installed and grounded properly
•Make sure the wall coverings around the range can withstand the heat generated by the range.
•To eliminate the need to reach over the surface elements, cabinet storage space above the elements should be avoided.
Template (1) |
Anchor Sleeves (12) | Lag Bolts (12) |
(For
PARTS NOT PROVIDED
(UL Approved 40 or 50 AMP) | Strain Relief |
| (For Conduit |
Installations Only) |