6PREPARE TO INSTALL THE RANGE
INSTALLATION DRAWINGS
NOTE
SAVE FOR THE USE OF THE LOCAL ELECTRICAL INSPECTOR
CLEARANCES AND DIMENSIONS (Figure 1) To install range refer to the following Figure 1.
For installation in CANADA, a
CAUTION
CAUTION
•Make sure that the wall covering, countertop and cabinets around the range can with- stand the heat (up to 194°F) generated by the range.
-Discoloration, delamination or melting may occur.
-This range has been designed to comply with the maximum allowable wood cabinet tem- peratures of 194°F.
A = 30 (76.2 cm) For U.S.A
=30 (76.2 cm) ~ 31 (78.7 cm) For CANADA
FIgURE 1
MINIMUM DIMENSIONS (Figure 2)
•Cabinet storage space located above the surface units should be avoided.
•Install a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets if cabinet storage is to be provided.
- 
heated surface elements can be reduced.
FIgURE 2
*30" (76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an unprotected wood or metal cabinet; or 24" (60.9 cm) minimum when bottom of wood or metal cabinet is protected by not less than 1/4”(6.4 cm) ame retardant millboard covered with not less than no. 28 MSG sheet steel, 0.015" (0.381 mm) stainless steel, 0.024" (0.610 mm) aluminum or 0.020" (0.508 mm) copper.
**15" (38.1 cm) minimum between countertop and adjacent cabinet bottom.
