LG Electronics M2780DN Appendix, Brightness Command k h, OSD Select Command k l, Colour Command k

07. Brightness (Command: k h)

►►To adjust screen brightness.

You can also adjust brightness in the PICTURE menu.

Transmission

[k][h][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

Ack * Refer to ‘Real data mapping 1’. See page 153. [h][ ][Set ID][ ][OK/NG][Data][x]

11. OSD Select (Command: k l)

►►To select OSD (On Screen Display) on/off when control- ling remotely.

Transmission
[k][l][	][Set ID][ ][Data][Cr]
Data	00 : OSD off	01 : OSD on
Ack

[l][ ][Set ID][ ][OK/NG][Data][x]

08. Colour (Command: k i)

►►To adjust the screen colour. (Except PC mode)

You can also adjust colour in the PICTURE menu.

Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping 1’. See page 153.

Ack

[i][ ][Set ID][ ][OK/NG][Data][x]

12. Remote control lock mode (Command: k m)

►►To lock the front panel controls on the monitor and remote control.

Transmission

[k][m][ ][Set ID][ ][Data][Cr]

Data 00 : Lock off 01 : Lock on

Ack

[m][ ][Set ID][ ][OK/NG][Data][x]

*If you are not using the remote control, use this mode.

When main power is on/off, external control lock is released.

*Local Power Key will work properly.

09. Tint (Command: k j)

►►To adjust the screen tint. (Except PC mode)

You can also adjust tint in the PICTURE menu.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Red : 00 to Green : 64

* Refer to ‘Real data mapping 1’. See page 153.

Ack

[j][ ][Set ID][ ][OK/NG][Data][x]

13. Treble (Command: k r)

►►To adjust treble.

You can also adjust treble in the AUDIO menu.

Transmission

[k][r][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping 1’. See page 153.

Ack

[r][ ][Set ID][ ][OK/NG][Data][x]

10. Sharpness (Command: k k)

►►To adjust the screen sharpness.

You can also adjust sharpness in the PICTURE menu.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping 1’. See page 153.

Ack

[k][ ][Set ID][ ][OK/NG][Data][x]

14. Bass (Command: k s)

►►To adjust bass.

You can also adjust bass in the AUDIO menu.

Transmission

[k][s][ ][Set ID][ ][Data][Cr]

Data Min : 00 to Max : 64

* Refer to ‘Real data mapping 1’. See page 153.

Ack

[s][ ][Set ID][ ][OK/NG][Data][x]

APPENDIX

151