LG Electronics M2380DF Watching Tv / Programme Control Input List, Antenna, Component, Hdmi

WATCHING TV / PROGRAMME CONTROL

WATCHING TV / PROGRAMME CONTROL

INPUT LIST

HDMI1/2, AV1/2, COMPONENT and RGB can be recognized by a detect pin and thus enabled only when an external device approves voltage.

By using TV/RAD button, you can move from External Input to RF Input and to the last watched pro- gramme in DTV/RADIO/TV mode.

•Antenna or Cable: Select it when watching the DTV/TV. (Digital cable input is available only at Finland, Sweden and “--” country)

•AV1, AV2: Select it when watching the VCR or external equipment.

•Component: Select it when using the DVD or the Digital set-top box depends on connector.

•RGB: Select it when using PC depends on connector.

•HDMI 1, HDMI 2: Select it when using DVD, PC or Digital set-top box depend on connector.

Antenna AV1 AV2 Component

HDMI 2 HDMI 1 RGB

1INPUT

Select the input source.

!NOTE

►►The OSD (On Screen Display) is displayed on the screen as shown below.

• When turning the product on in HDMI input.

Is the input connected to your PC? • When switching to HDMI input.

• When connecting an HDMI cable with no signal.

Yes No

Do not show message again.

•If you select "Yes," the size and image quality are optimised for your PC.

•If you select "No," the size and image quality are optimised for the AV device (DVD player, set-top box, gaming device).

•If you select "Do not show message again," this message does not appear until the monitor is reset. You can change the set value in MENU s Option sInput label.

•The values set for HDMI1/HDMI2 are saved independently.

64