LG Electronics M2780DF Wall Mount Horizontal Installation, Screw Mounting Interface Dimensions

WALL MOUNT : HORIZONTAL INSTALLATION

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10cm 10cm

10cm 10cm

10cm

If you intend to mount the set to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the set using the wall mounting interface (optional parts), attach it carefully so it will not drop.

1.Be sure to use screws and a wall mount that meet VESA standards.

2.Using screws longer than those recommended might damage the product.

3.Using screws that do not meet VESA standards might either damage the product or result in it coming away from the wall. We will not be held responsible for any damage resulting from failure to follow these instructions.

4.VESA compatible only with respect to screw mounting interface dimensions and mounting screw speci- fications

5.Please use VESA standard as below.

5-1) 784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x Length 10 mm 5-2) 787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad and screws.

< Screw Mounting Interface Dimensions >				Wall Mount Pad
Model	M2080D	M2080DB	M2780D
	M2280D	M2280DB	M2780DF
	M2380D	M2380DB	M2780DN
	M2080DF	M2080DN
	M2380DF	M2380DN
	M2380DF	M2380DN
VESA ( A x B)	75 x 75		200 x 100
Wall mount	RW120		RW240
bracket(optional)

PREPARATION

15