| Controlling Multiple Set | |
|
|
|
Transmission / Receiving Protocol
01. Power(Command: a)
►To control Power On / Off of the Set. Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0: Power Off | 1: Power On |
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
►To show the status of Power On / Off. Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 0: Power Off | 1: Power On |
02.Input Select (Command: b) (Main Picture Input) ► To select input source for the Set.
You can also select an input source using the INPUT button on the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 2: AV
4:Component
7:RGB (PC)
8:HDMI (DTV)
9:HDMI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 2: AV
4:Component
7:RGB (PC)
8:HDMI (DTV)
9:HDMI (PC)
A5
