| Controlling Multiple Set | |
|
|
|
Transmission / Receiving Protocol
47.logo Indicator (Command: f p)
► To set the LED for Power Indicator
Transmission
[f][p][][Set ID][][Data][Cr]
Data 0: Off
1: On
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
48.Serial no.Check (Command: f y) ► To read the serial numbers
Transmission
[f][y][][Set ID][][Data][Cr]
Data FF (to read the serial numbers)
Acknowledgement
[y][][Set ID][][OK/NG][Data1] ~ [Data13] [x]
* The data format is ASCII Code.
