User Menus
Selecting Options
|
|
| OPTION | Move | OK | |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ▲ |
|
|
|
|
| ISM Method | : Normal |
|
|
|
|
| DPM Select | : On | ꔋ |
|
|
|
| Power Indicator | : ON |
|
|
|
|
| Logo Light | : ON |
|
|
|
|
| Ineterface Select | : RS232C |
|
|
|
|
| Network Setup |
|
|
|
|
|
|
| ||
|
|
|
| Information |
|
|
|
|
|
| Factory Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DPM Select
Turns power saving on/off.
Power Indicator
Sets the power indicator on the front side of the set to On or Off. If you set to Off, it will go Off. If you set On at any time, the power indicator will automatically be turned on.
Logo Light
Resets the Logo Display Lamp on the front of the set to On or Off. If you set On, the lamp will automatically turn on.
Ineterface Select
Sets up network connections.
-Network: LAN - Enables communication via Ethernet.
-
Network Setup
-DHCP: Allocates and sets up IP automatically.
-Manual: Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS. The setup process is complete when you select Execute, and "IP Setup Completed" is displayed at the bottom of the screen. While "Wait for IP Setup" is displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is displayed for up to 40 seconds.
*If Network Select is set to Serial, DHCP and Manual are disabled.
Information
You can find information about your set serial number, F/W version, IP address and MAC address here.
Factory Reset
Returns the set to the default factory settings.
32
