| Controlling Multiple Set | |
|
|
|
Transmission / Receiving Protocol
16. Abnormal state (Command: z)
►Abnormal State: Used to Read the power off status when
[k][z][ ][Set ID][ ][Data][Cr]
Data FF: Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
0:Normal (Power on and signal exist)
1:No signal (Power on)
2:Turn the monitor off by remote control
3:Turn the monitor off by sleep time function
4:Turn the monitor off by
8:Turn the monitor off by off time function
9:Turn the monitor off by auto off function
17. ISM mode(Command: j p)
►Used to select the afterimage preventing function. Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1H: Inversion
2H: Orbiter
4H: White Wash
8H: Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
