Important Safety
Instructions
Please keep for future reference. Read and follow all instructions before using your oven to prevent the risk of fire, electric shock, personal injury, or damage when using the oven. This guide does not cover all possible conditions that may occur. Always contact your service agent or manufacturer about problems that you do not understand.
CAUTION
19. The oven should be cleaned regularly and any food deposits should be removed.
Failure to maintain the oven in a clean condition could lead to deterioration of the surface. This could adversely affect the life of the appliance and possibly result in a hazardous situation.
20. Only use the temperature probe recommended for this oven.
You can not ascertain that the temperature is accurate with an unsuitable temperature probe.
21.If there are heating elements, the appliance becomes hot during use. Care should be taken to avoid touching the heating elements inside the
oven.
There is danger of a burn.
22.Follow exact directions given by each manufacturer for their popcorn product. Do not leave the oven unattended while the corn is being
popped. If corn fails to pop after the suggested times, discontinue cooking. Never use a brown paper bag for popping corn. Never attempt to pop leftover kernels.
Overcooking could result in the corn catching a fire.
23.This appliance must be earthed.
The wires in the mains lead are colored in accordance with the following codes
BLUE ~ Neutral BROWN ~ Live
GREEN & YELLOW ~ Earth
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:
The wire which is colored BLUE must be connected to the terminal which is marked with the letter N or Colored BLACK.
The wire which is colored BROWN must be connected to the terminal which is marked with the letter L or colored RED.
The wire which is colored GREEN & YELLOW or GREEN must be connected to the terminal which is marked with the letter E or 
.
If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or a similarly qualified person in order
to avoid potential hazards.
Improper use may cause serious electric damage.
6
