LG Electronics 1302-REV00, MFL67652408 25 Check that the right and left sides of the screen are parallel to the wall using a

1 24

INSTALLATION

25 Check that the right and left sides of the screen are parallel to the wall using a

leveler.If it is not parallel to the wall, calibrate the screen angle using the space

steels.

Unhang the screen and remove the ﬁxed rings and magnets.

Calculate the amount of space steels to be used using the formula below, locate

the space steels between the wall and the rings/magnets and ﬁx them again, and

align the screen to be parallel to the wall.

(0.1° → 2 mm → 1 space steel)

❶

❷

❸

Horizontal Vertical

❶Horizontal Vertical

❷0.2 °j Move to the next hole 0.1j Insert 2 space steels

❸0.3°-0.4 °jSkip 2-3 holes 0.2j Insert 3-4 space steels

Contents

Main Safety Precautions Installation Page PREPARATION Accessories Preparations INSTALLATION How to x anchors and screws CAUTION Installation Procedure (Stand Type) Page Page 9 10 mm Page Page Page 22 Two people must lift the screen above the guide tape and hang it on the rings. CAUTION Page 25 Check that the right and left sides of the screen are parallel to the wall using a If the screen is not parallel to the wall If the screen does not stay level Page Ez Bracket Adjustment Guide 1. Reset projection 2. Adjust the projection to t within the screen 3 1 2 3. Adjust the left and right widths of the projection so they are equal 1 2 Page Page 6. If the projection is rectangle-shaped,