18INSTALLATION
Ez Bracket Adjustment Guide 1. Reset projection
*Press the Edge Adj button on the remote control and select Reset.
(Select Settings → OPTION → Edge Adj → Reset to reset the position of the projection.)
OPTION
|
| ︿ |
• | Language |
|
• | Caption | : Off |
• | Pointer |
|
• | Set ID | : 1 |
• | PJT Mode | : Front |
• | Edge Adj |
|
• | Blank Image | : Blue |
?﹀
2.Adjust the projection to fit within the screen
1 If the projection is too large
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to reduce the size of the projection.
2 To move the projection to the left
Insert the hex wrench into the hole as illustrated (left) and turn it counterclockwise to move the projection to the left.
'
