PIP Function
-PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source will show a smaller inset image.
-When you select RGB1 or RGB2 for main picture in PIP, you can watch video (AV1 or AV2),
Watching PIP
Press the PIP button to switch on the sub pictures.
• Press this button again to switch it off.
Component |
Video |
10:30 |
PIP Aspect Ratio
Press the PIP ARC button.
• The sub picture appears as below.
4 : 3 |
| 1 6 : 9 |
Moving the PIP
Press the WIN.POSITION button.
Repeatedly press the D / E or F / G button until desired position is achieved. The sub picture moves up/down or left/right.
Swapping the PIP
Press the SWAP button to exchange the main and sub pic- tures.
Component | Video |
Video | Component |
10:30 | 10:30 |
Win. Position
D
F G
E
Main Picture Size Adjustment
Press the ZOOM+/ZOOM- button to enlarge or reduce the main picture size when viewing the PIP.
Zoom In
100 %
D
F G
E
PIP Size
Press the WIN.SIZE button and then F / G button to adjust the sub picture size.
With WIN.SIZE button in twin picture mode, main and sub picture is adjusted simultaneously. With WIN.SIZE button in PIP mode, sub picture is adjusted.
Win. Size
F G 
Main Picture |
| Sub Picture |
|
|
|
Selecting a source input signal for the PIP
Press the SUB INPUT button to select the input mode for the sub picture.
Component |
Video |
10:30 |
•In RGB1 and RGB2 for main picture, you can select COMPO- NENT 480i, VIDEO (AV1 or AV2) and
•In VIDEO (AV1 or AV2) and
•In COMPONENT 480p/720p/1080i for main picture, you can select VIDEO (AV1 or AV2) and
•In COMPONENT 480i for main picture, you can select RGB1 and RGB2 for sub picture.
Main Picture Position Adjustment
Press the ZOOM+/ZOOM- button. Adjust the main picture posi-
tion with the D / E or F / G buttons in enlarged main picture.
Zoom In
100 %
D
F G
E
21
