LG Electronics MT-50PZ40, MT-50PZ41, MT-50PZ43S, MZ-50PZ42, MZ-50PZ43 How to connect, How to use

Watching VCR (When the Interface board is installed.)

The interface board(AP-50EA40/41) is not equipped on MT/MZ-50PZ42/43 series models.

When connecting the Plasma Monitor with external equipments, match the colours of connecting ports (Video - yellow, Audio(L) - white, Audio(R) -red).

Connect the VIDEO INPUT socket(yellow) with the BNC-RCA adapter to the VIDEO INPUT socket of the set.

If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor. If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regu- lar VCR to the Video input.

Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still picture from a VCR, 4:3 picture format or if a CH label is present; the fixed image may remain visible on the screen.

Use the orbiter function to avoid having a fixed image. (Refer to p.18)

1.Press INPUT SELECT button on the remote control and select Video or (AV1 or AV2). (When connecting with S-Video, select the S-Video)

2.Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner’s manual)

Watching Cable TV (When the Interface board is installed.)

The interface board(AP-50EA40/41) is not equipped on MT/MZ-50PZ42/43 series models.

After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV program- ming. This monitor cannot display TV programming without a TV tuner device or cable TV converter box connected to the monitor.

1.Press INPUT SELECT button on the remote control and select Video or (AV1 or AV2).

2.Tune to cable service provided channels using the cable box.

Watching external AV source (When the Interface board is installed.)

The interface board(AP-50EA40/41) is not equipped on MT/MZ-50PZ42/43 series models.

When connecting the Plasma Monitor with external equipments, match the colours of connecting ports. Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

1.Press INPUT SELECT button on the remote control of the monitor to select Video or (AV1 or AV2).

2.Operate the corresponding external equipment. (See external equipment operating guide.)

Watching DVD (When the Interface board is installed.)

The interface board(AP-50EA40/41) is not equipped on MT/MZ- 50PZ42/43 series models.

How to connect

Connect DVD video inputs to Y, PB, PR of COMPONENT (DVD

INPUT) and audio inputs to Audio sockets of AUDIO INPUT.

Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.

How to use

1.Press INPUT SELECT button on the remote control of the monitor to select Component or (AV1 or AV2).

2.Try this after turning on the DVD player.

(Refer to the DVD player's manual for operating instructions.)

•Component Input ports

You can get better picture quality if you con- nect DVD player with component input ports as below.

Component ports of the	Y	PB	PR
Monitor
Video output ports	Y	Pb	Pr
	Y	B-Y	R-Y
of DVD player	Y	Cb	Cr
	Y	PB	PR

8