External Control Device Setup
18. Bass (Command2:s)
GTo adjust bass.
You can also adjust bass in the Sound menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•Refer to ‘Real data mapping 1’. See page 30. Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
19. Balance (Command2:t)
GTo adjust balance.
You can also adjust balance in the Sound menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•Refer to ‘Real data mapping 1’. See page 30. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
20. Color Temperature (Command2:u)
GTo adjust color temperature.
You can also adjust ACC in the Picture menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Normal 2: Warm 3: Off
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
21. Red Adjustment (Command2:v)
GTo adjust red in color temperature.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 3C
•Refer to ‘Real data mapping 3’ as shown right. Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
22. Green Adjustment (Command2:w)
GTo adjust green in color temperature.
Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 3C
•Refer to ‘Real data mapping 3’ as shown right. Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
23. Blue Adjustment (Command2:$)
GTo adjust blue in color temperature.
Transmission
[k][$][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 3C
•Refer to ‘Real data mapping 3’ as shown below. Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
* Real data mapping 3
0:
1:
2:
1E : 0
3A : +28
3B : +29
3C : +30
24. SUB Input Select (Command2:y)
GTo select input source for sub picture in PIP mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 1 | : Video | 4 | : Component 2 |
2 | : | 5 | : RGB |
3 | : Component 1 | 6 | : DVI |
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
25. Abnormal State (Command2:z)
GTo recognize an abnormal state.
Transmission
[k][z][ ][Set ID][ ][FF][Cr]
Data FF:Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
Data 0: Normal (Power on and signal exist)
1:No signal (Power on).
2:Turn the monitor off with remote control.
3:Turn the monitor off with Sleep Time function.
4:Turn the monitor off with
5:5V down.
6:AC down.
7:Turn the monitor off with Fan Alarm function.
8:Turn the monitor off with Off Time function.
9:Turn the monitor off with Auto Off function.
*This function is “read only”.
32 Plasma Monitor
