External Control Device Setup
09. Color (Command2:i)
GTo adjust the screen color.
You can also adjust color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
•Refer to ‘Real data mapping 1’. See page 30. Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
10. Tint (Command2:j)
GTo adjust the screen tint.
You can also adjust tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0 ~ Green : 64
•Refer to ‘Real data mapping 1’. See page 32.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
11. Sharpness (Command2:k)
GTo adjust the screen sharpness.
You can also adjust sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•Refer to ‘Real data mapping 1’. See page 32. Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
12. OSD Select (Command2:l)
GTo select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0: OSD off | 1: OSD on |
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
13. Remote Control Lock Mode (Command2:m)
GTo lock the remote control and the front panel controls on the monitor.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0: Lock off | 1: Lock on |
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
•If you’re not using the remote control and front panel controls on the monitor, use this mode. When main power is on/off, remote control lock is released.
14. PIP / DW (Command2:n)
GTo control the PIP (Picture In picture)/DW (Double Window). You can also control the PIP/DW using the PIP/DW button on the remote control or in the PIP/DW menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0: | PIP/DW off | 2: DW1 |
1: | PIP | 3: DW2 |
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
15. Split Zoom (Command2:p)
GTo operate split zoom function and select the split zoom section number.
Transmission
[k][p][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max:99
•Refer to ‘Real data mapping 2’.
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
*Real data mapping 2 0 : Reset split zoom
21:Selection 1 of 2 split zoom
24:Selection 4 of 2 split zoom
41:Selection 1 of 4 split zoom
42:Selection 2 of 4 split zoom
44:Selection 4 of 4 split zoom
45:Selection 5 of 4 split zoom
91:Selection 1 of 9 split zoom
99:Selection 9 of 9 split zoom
16.PIP Position (Command2:q)
GTo select sub picture position for PIP.
You can also adjust the sub picture position using WIN.POSITION on the remote control or in the PIP/DW menu.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0: Right down on screen
1:Left down on screen
2:Left up on screen
3:Right up on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
17. Treble (Command2:r)
GTo adjust treble.
You can also adjust treble in the Sound menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 64
•Refer to ‘Real data mapping 1’. See page 30. Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Owner’s Manual 31
