LG Electronics MU-60PZ95V External A/V Source Setup, How to connect, How to use, DVD Setup

Installation

External A/V Source Setup

How to connect

Connect the audio and video cables from the external equipment's output jacks to the Monitor input jacks, as shown in the figure.

When connecting the Monitor to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).

How to use

							MONITOR	(	) R ( )	( ) L (	)
COMPONENT INPUT 2
	PB	PR	R	L	R		OUTPUT
Y						L/MONO
COMPONENT INPUT 1							A/V INPUT		EXTERNAL SPEAKER		AC INPUT
UT	VIDEO						VIDEO	S-VIDEO
				AUDIO		AUDIO

1.Select the input source with using the INPUT SELECT but- ton on the remote control. (If connected to A/V INPUT 1, select Video input source).

2.Operate the corresponding external equipment. Refer to external equipment operating guide.

Camcorder

R AUDIO L VIDEO

Video Game Set

DVD Setup
How to connect
1. Connect the DVD video outputs (Y, PB, PR) to the COMPO-
NENT (Y, PB, PR) INPUT jacks on the Monitor and connect the
DVD audio outputs to the AUDIO INPUT jacks on the Monitor,
as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the	COMPONENT INPUT 2								OUTPUT	( ) R ( )	( ) L ( )
									MONITOR
S-VIDEO input on the Monitor and connect the DVD audio out-	Y	PB	PR	R	L	R	L/MONO		S-VIDEO		AC INPUT
	UT
	COMPONENT INPUT 1								A/V INPUT	EXTERNAL SPEAKER
puts to the AUDIO INPUT jacks on the Monitor, as shown in the		VIDEO			AUDIO		AUDIO	VIDEO
figure.
NOTE: If your DVD player does not have component video output,
use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the INPUT SELECT button on the remote control to select
Component 1 or Component 2. (If connected to S-VIDEO,							or
select the Video external input source.)
3. Refer to the DVD player's manual for operating instructions.		B	R	(R) AUDIO (L)					S-VIDEO	(R) AUDIO (L)
• Component Input ports							DVD
To get better picture quality, connect a DVD player to the com-
ponent input ports as shown below.

Component ports	Y	PB	PR
on the Monitor
Video output ports	Y	Pb	Pr
	Y	B-Y	R-Y
on DVD player	Y	Cb	Cr
	Y	PB	PR

12 Plasma Monitor