Cisco Systems manual Installing the Cisco AS5350XM Universal Gateway, Setting Up the Chassis

C H A P T E R 3

Installing the Cisco AS5350XM Universal

Gateway

This chapter guides you through the installation of the Cisco AS5350XM universal gateway and includes the following sections:

•Setting Up the Chassis, page 3-1

•Connecting to the Network, page 3-6

•Connecting to the Console and Auxiliary Ports, page 3-11

•Connecting a Signal Generator to the BITS Port, page 3-12

•Connecting an Alarm to the Alarm Port, page 3-13

•Supplying Power, page 3-13

•Where to Go Next, page 3-18

Warning Only trained and qualified personnel should be allowed to install or replace this equipment. Statement 49

Warning This equipment is intended to be grounded. Ensure that the host is connected to earth ground during normal use. Statement 39

Warning Incorrect connection of this or connected equipment to a general purpose outlet could result in a hazardous situation. Statement 87

Setting Up the Chassis

You can set the chassis on a desktop or install it in a rack. Use the procedure in this section that best meets the needs of your network:

•Setting the Chassis on a Desktop

•Rack-Mounting the Chassis

Cisco AS5350XM Universal Gateway Chassis Installation Guide

OL-6417-02 3-1