Cisco Systems AS5350XM manual Replacing the Chassis Cover, Required Tools and Equipment

Appendix A Replacing Memory Components

Replacing the Chassis Cover

Step 8 Insert the new DIMM by sliding the end with the metal fingers into the DIMM socket, as shown in Figure A-5.

Figure A-5 Inserting the New DIMM into the Socket

	35688
Step 9	Snap the latches into place. Do not use excessive force, because the socket might break.
Step 10	Replace the gateway chassis cover. (See the “Replacing the Chassis Cover” section on page A-8.)
Step 11	Power on the universal gateway. If error messages relating to memory are displayed, remove the DIMM
	and reinstall it, taking care to seat the DIMM firmly in its socket.

Replacing the Chassis Cover

This section describes the procedure for replacing the chassis cover.

Required Tools and Equipment

•Medium Phillips screwdriver

•Five screws

Cisco AS5350XM Universal Gateway Chassis Installation Guide

A-8 OL-6417-02