Appendix A Replacing Memory Components
Replacing the Chassis Cover
Chassis Cover Replacement
To replace the chassis cover, follow this procedure:
Step 1 Place the chassis bottom so that the front panel is facing you. (See Figure
Figure A-6 Replacing the Chassis Cover
Chassis cover
35662
Front panel
Chassis bottom
Step 2 Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at the top rear of the chassis.
Step 3 Lower the front of the top cover to close the chassis, and ensure the following:
•The chassis cover tabs fit under the edge of the chassis rear panel so that they are not exposed.
•The chassis tabs fit under the chassis cover so that they are not exposed.
•The chassis cover side tabs on both sides fit inside the chassis side panels so that they are not exposed.
When the chassis cover is properly assembled, no tabs are visible. (See Figure
Cisco AS5350XM Universal Gateway Chassis Installation Guide
| ||
|
