Cisco Systems AS5350XM manual Required Tools and Equipment, Attaching the Brackets

Chapter 3 Installing the Cisco AS5350XM Universal Gateway

Setting Up the Chassis

Required Tools and Equipment

You need the following tools and equipment to rack-mount the chassis:

•Number 2 Phillips screwdriver (not included)

•Medium flat-blade screwdriver (not included)

•Screws for attaching the chassis to the rack (not included)

•Standard rack-mount brackets (included)

•Screws for attaching the brackets to the chassis (included)

Figure 3-2 Standard Rack-Mount Brackets

Bracket for 19-inch rack Bracket for 23-inch rack

36012

Attaching the Brackets

To attach the mounting brackets to the chassis, follow this procedure:

Step 1 Set the chassis on a flat surface. (See Figure 3-3.)

Note The chassis may be installed with either the front or rear panel facing forward.

Step 2 Attach the standard 19- (48.26-) or 23-inch (58.42-cm) rack brackets to the sides of the chassis. Use the screws provided with the mounting brackets. (See Figure 3-3.)

Note There are three sets of mounting holes on the sides of the chassis. Attach the brackets for front, rear, or middle mounting.

Figure 3-3 Standard Bracket Installation—Front Panel Forward

35669

Note: The second bracket attaches to the other side of the chassis.

The chassis can also be installed with the rear panel forward.

Cisco AS5350XM Universal Gateway Chassis Installation Guide

3-4 OL-6417-02