Appendix A Replacing Memory Components
Replacing DIMMs
Warning Before opening the unit, disconnect the
Step 2 Remove all interface cables from the rear panel of the universal gateway.
Step 3 Attach an
Step 4 Remove the chassis cover. (See the instructions in the “Removing the Chassis Cover” section on page
Step 5 Use Figure
Step 6 Pull the socket latches away from the DIMM, and then pull the DIMM out of the socket. (See Figure
Caution To prevent damage, do not press on the center of the DIMM. Handle the DIMM carefully.
Figure A-4 Removing and Replacing the DIMM
35685
Step 7 Position the new DIMM so that the polarization notch is located at the right end of the DIMM socket.
Cisco AS5350XM Universal Gateway Chassis Installation Guide
| ||
|