Installation

External Equipment Connections

PC Setup

-This monitor provides Plug and Play capability, meaning that the PC adjusts automatically to its settings. The monitor sends configuration information (EDID) to the PC using the Video Electronics Standard Association (VESA) Display Data Channel (DDC) protocol.

-The monitor perceives 640x480, 60Hz as DTV 480p based on the PC graphic card. In this case, change the screen scanning rate for the graphic card.

How to connect

1.To get the best picture quality, adjust the PC graphics card to a 1280x1024, 60Hz. Resolutions over UXGA cannot be displayed.

2.Use the monitor’s RGB INPUT or DVI (Digital Visual Interface) port for video connections, depending on your PC connector.

If the graphic card on the PC does not output ana- log and digital RGB simultaneously, connect only one of either RGB INPUT or DVI INPUT to display the PC on the monitor.

If the graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB or DVI; (the other mode is set to Plug and Play automatically by the monitor.)

3.Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as required.

 

 

 

 

 

COMPONEN

 

 

 

 

 

INPUT 2

INPUT

HDMI

DVI INPUT

AUDIO INPUT

RGB INPUT

COMPONEN

INPUT 1

SERVICE)

 

 

 

 

 

 

 

 

 

 

VIDEO

How to use

1.Turn on the PC and the monitor.

2.Turn on the display by pressing the POWER button on the monitor's remote control.

3.Use the INPUT button on the remote control to select RGB or DVI.

4.Check the image on your monitor. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

NOTES: • Use a DVI cable.

Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become permanently imprinted on the screen. Use the Orbiter screen saver when possible.

The synchronization input form for Horizontal and Vertical frequencies is separate.

Owner’s Manual 15

Page 15
Image 15
LG Electronics MW 71PY10 owner manual PC Setup