External Control Device Setup
Set ID
-Use this function to specify a monitor ID number.
-Refer to ‘Real Data Mapping 1’. See page 34.
1. Press the MENU button and then use the D / E button to select the SPECIAL
menu.
PICTURE
2. Press the G button and then use D / E button to select Set ID.
SOUND
TIMER
1
Language
Key lock
ISM Method
Low power
3. Press the G button and then use F / G button to adjust Set ID to choose the
SPECIAL
Set ID | G | ||
|
| Demo |
|
|
|
| |
|
|
| |
Index |
| ||
desired monitor ID number.
SCREEN
• The adjustment range of Set ID is 1 ~ 99.
PIP/DW Menu Prev.
Communication Parameters
• Baud rate : 9600 bps (UART) | • Stop bit : 1 bit |
• Data length : 8 bits | • Communication code : ASCII code |
• Parity : None |
|
Command Reference List
| COMMAND 1 COMMAND 2 | DATA | |||
|
|
|
| (Hexadecimal) | |
01. Power | k | a | 0 | ~ 1 | |
02. | Input Select | k | b | 1 | ~ 9 |
03. Aspect Ratio | k | c | 0 | ~ 3 | |
04. Screen Mute | k | d | 0 | ~ 1 | |
05. Volume Mute | k | e | 0 | ~ 1 | |
06. | Volume Control | k | f | 0 | ~ 64 |
07. | Contrast | k | g | 0 | ~ 64 |
08. | Brightness | k | h | 0 | ~ 64 |
09. | Color | k | i | 0 | ~ 64 |
10. Tint | k | j | 0 | ~ 64 | |
11. Sharpness | k | k | 0 | ~ 64 | |
12. OSD Select | k | l | 0 | ~ 1 | |
13. | Remote Control Lock Mode | k | m | 0 | ~ 1 |
14. PIP/DW | k | n | 0 | ~ 3 | |
15. | Split Zoom | k | p | 0 | ~99 |
16. | PIP Position | k | q | 0 | ~ 3 |
17. Treble | k | r | 0 | ~ 64 | |
18. Bass | k | s | 0 | ~ 64 | |
19. | Balance | k | t | 0 | ~ 64 |
20. | Color Temperature | k | u | 0 | ~ 2 |
21. | PIP Input Select | k | y | 1 | ~ 9 |
22. Abnormal State | k | z | 0 | ~ a | |
23. ISM Method | j | p | 0 | ~ 3 | |
24. Low Power | j | q | 0 | ~ 1 | |
25. | Picture Size Setting | j | t | 0 | ~30 |
| for DW mode |
|
|
|
|
26. Auto Configure | j | u | 1 |
| |
27. Key | m | c | Key code | ||
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*[Command 1]: k, j, m
*[Command 2]: To control PDP set.
*[Set ID]: You can adjust the set ID to choose desired moni- tor ID number in Special menu. Adjustment range is 1 ~ 99. When selecting Set ID ‘0’, every con- nected PDP set is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol.
*[DATA]: To transmit command data.
Transmit ‘FF’ data to read status of command.
*[Cr]: Carriage Return ASCII code ‘0x0D’
* [ ]: ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
*The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from
Data 1: Illegal Code
2: Not supported function
32 Plasma Monitor
