External Control Device Setup
21. PIP Input Select (Command2:y)
GTo select input source for sub picture in PIP mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data | 1 | : Video1 | 6 | : DVI |
| 2 | : Video2 | 7 | : Video3 |
| 3 | : Component1 | 8 | : Video4 |
| 4 | : Component2 | 9 | : HDMI |
| 5 | : RGB |
|
|
Acknowledgement |
|
| ||
|
|
| ||
[y][ ][Set ID][ ][OK][Data][x] |
|
| ||
|
|
|
|
|
Data | 1 | : Video1 | 6 | : DVI |
| 2 | : Video2 | 7 | : Video3 |
| 3 | : Component1 | 8 | : Video4 |
| 4 | : Component2 | 9 | : HDMI |
5: RGB
22.Abnormal State (Command2:z)
G To recognize an abnormal state.
Transmission
[k][z][ | ][Set ID][ ][FF][Cr] |
|
|
|
|
Data | FF:Read |
|
Acknowledgement |
| |
|
| |
[z][ ][Set ID][ ][OK][Data][x] |
| |
|
|
|
Data | 0: Power on(signal) | 6: AC detect off |
| 1: Power on(No signal) | 7: Fan Alarm off |
| 2: Remote control off | 8: Off timer off |
| 3: Sleep time off | 9: No signal off |
| 4: | a: Connection Detect off |
5:5V monitor off
*If you do not press any button within 2 hours after the monitor turns on with the On Timer function, the monitor will automatically revert to standby mode.
24. Low Power (Command2:q)
G To control the low power function on/off.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data 0: Low power off 1: Low power on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0: Low power off
1:Low power on
25.Picture Size Setting for DW mode (Command2:t)
G To adjust main picture size in DW mode.
Transmission
[j][t][ ][Set ID][ ][Data][Cr]
Data Min: 0 ~ Max: 30
•Refer to ‘Real data mapping1’. See page 34. Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data Min: 0 ~ Max: 30
26. Auto Configure (Command2:u)
G To adjust picture position and minimize image shaking automatically. Auto Configure only works in
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1
•Refer to ‘Real data mapping1’. See page 34. Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 1
23. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[j][p][ | ][Set ID][ ][Data][Cr] |
|
|
|
|
|
|
Data | 0: Normal | 2: Orbiter | |
| 1: White wash | 3: Inversion | |
Acknowledgement |
|
| |
|
|
| |
[p][ ][Set ID][ ][OK][Data][x] |
|
| |
|
|
|
|
Data | 0: Normal | 2: Orbiter | |
| 1: White wash | 3: Inversion | |
27. Key (Command2:c)
G To adjust Key code for IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to See page 38.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
36 Plasma Monitor
