LG Electronics PRCKD40E, PRCKD20E owner manual Central control address setting

Setting function of wired remote controller installation

Centralcontrol addresssetting

1 Enter the Installation Setting mode.

2 Press the Function Setting button repeatedly to reach function code of ‘11’.

Flashes

3 Press the Right button to move to ‘Setting of 1’.

Flashes

4 Press the Up/Down button to set the central control address.

Central control address

5 Press the Set/Cancel button to complete the central control address setting.

*This is the function to set the central control address of AHU.

Display C: Installation setting display

Function Setting1 Setting2

Code

ENGLISH

Owner's Manual 25