LG Electronics 32700H, SAC30708043 TV Camport Auto Sense Operation, Camport Operation Stand-Alone

TV CAMPORT AUTO SENSE OPERATION

The CAMPORT Auto Sense function is enabled when:

1.Installer Menu Item 34, CAMPORT EN is set to 1 AND

2.Installer Menu Item 40, AUTO CAMPORT is enabled (1).

Selectable= Can be accessed with INPUT key, direct access, etc.

Auto Sense= Switches to this input when connector is insert- ed.

The camport (Side Video) has the highest priority and will override any commands including tuning to the Start Channel.

CAMPORT (Front Video) Functionality Control

Item 34	Item 40	Front Video
CAMPORT EN	AUTO CAMPORT	Operation
0	0	Disabled
0	1	Disabled
1	0	Selectable
1	1	Auto Sense

CAMPORT Operation (Stand-Alone)

When Camport Auto Sense is enabled as above, the TV’s	Previous State		Operation		State
source will switch to the side video aux source whenever a	Before Inserting		While CAMPORT		Upon Removal
plug is inserted into any of the side video panel inputs	CAMPORT		Is Active		Of CAMPORT
(either composite Video or S-Video).	Aux or RF Channel		None		Previous Aux
					or RF Channel
When the plug is removed, the TV will switch back to the	Aux or RF Channel		Direct Access		Last Requested
					RF or Aux Channel
previous channel or input source that the TV was using
	Aux or RF Channel		Ch Up/Down,		Previous Aux
before the plug was inserted. However, if any direct access
			Flashback		or RF Channel
to an RF channel or Aux channel is requested while the cam-
			and TV/AV Keys
port is active, then, when the camport plug is removed, the
TV will switch to the last requested channel. Source changes
using any Source Keys (INPUT) are ignored. Channel
Up/Channel Down and Flashback Commands are not direct
access tuning commands and they are also ignored.
						COMMERCIAL
ferent commands to the TV for the same user com-	CAMPORT		Is Active		Of CAMPORT
CAMPORT Operation (PPV)
The operation will be similar to that of the Stand-	Previous State		Operation		State
Alone mode. However, the PPV providers may send dif-	Before Inserting	While CAMPORT			Upon Removal
						MODE
mands. For instance, some providers will always send a	Aux or RF Channel		None		Previous Aux
					or RF Channel
direct tune command when it receives a channel
	Aux or RF Channel		Direct Access		Last Requested RF
up/down or a flashback command while other PPV
					or Aux Channel	SETUP
providers will just send a key command.
	Aux or RF Channel		Ch Up/Down,		Last Requested
			Flashback		Channel if PPV
			and TV/AV Keys		translates it to
					direct access tuning
				command. Otherwise,
					goes to Previous Aux
					or RF Channel

105