LG Electronics SAC30708043 Cloning CONNECTIONS/TEACHING Setup, Disconnect TV Power for 15 Seconds

COMMERCIAL MODE SETUP

CLONING CONNECTIONS/TEACHING SETUP

Teaching the Master Setup to Another TV

Connections for the LT2002 to Teach another TV the Master Setup

Antenna

or CATV

THE CLONE HAS CONTROL OF THE TV

THE CLONE IS VERSION			XX
THE TV IS VERSION			XX
THE SW IS REVISION			XX
CLONE CLOCK =		XX:XX
TV CLOCK	=	XX:XX

-PRESS ANY KEY TO CONTINUE.

-DISCONNECT CLONE WHEN DONE.

Ferrite Core	Connect cable to
(TDK, ZCAT	TV MPI Jack and	Status
	follow on screen
	instructions	Indicator
2035-0930)	MPI
		Reset
		Color
	• green	battery ok
	• red	battery low
		Blink pattern
	• slow	power on
		no communications
	• heartbeat power on
		communications ok

QuickSet II Programmer

LT2002

Target TV Clone Programmer

COMMERCIAL MODE SETUP

Teach Master TV’s Setup to the target TV

After learning is complete, remove the M.P.I. cable from the mas- ter TV and connect it to the target TV that you want to copy the master TV’s setup into. With “THE CLONE HAS CONTROL OF TV” message displayed, press 2 or use either Channel key to go to the “TEACH TO TV” option, press ON/OFF, POWER, or ENTER. Select the LT2002 memory that the new setup is in. Press On/Off to transfer the new setup and other information to the new TV. Teaching usually takes 2-3 minutes.

After the “TEACHING COMPLETE” message is displayed, press any key to return to the Clone menu, then press ON/OFF, POWER, or ENTER. If finished, detach M.P.I. cable from the target, newly-cloned TV.

Disconnect TV Power for 15 Seconds

Unplug the AC power cord of the newly-cloned TV from the power outlet for about 15 seconds to activate the newly-copied setup.

CLONE SELECTION MENU

(1)LEARN FROM TV

(2)TEACH TO TV

(3)SET CLONE CLOCK FROM TV

(4)SET TV CLOCK FROM CLONE

(5)DISPLAY TV SETUP

(6)DISPLAY CLONE SETUP

-TO CHANGE MENU ITEMS, PRESS CHANNEL KEYS OR DIGITS.

-TO EXECUTE ITEM, PRESS ON/OFF, POWER, OR ENTER

This menu should appear after any key is pressed on the Installer remote.

TEACHING IN PROGRESS,

PLEASE WAIT

This display will appear during Teaching function.

TEACHING COMPLETE

This display will appear after Teaching is complete.

94