
while operating can be well below the maximum value. Because the phone is designed to operate at multiple power levels to use only the power required to reach the network, in general, the closer you are to a wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government- adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.
This device was tested for typical
phone. To comply with FCC RF exposure requirements, a minimum separation distance of
0.79inches (2.0 cm) must be maintained between the user s body and the back of the phone.
0.79inches (2.0 cm) separation distance between the user's body and the back of the phone, and have not been tested for typical
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines.