On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place the display where the power cord is subject to damage,
Do not use this display near water such as near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool,
Displays are provided with ventilation openings in the cabinet to allow the release of heat generated during operation, If these openings are blocked,
•Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc,
•Place the display in a
•Cover the openings with cloth or other material,
•Place the display near or over a radiator or heat source,
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix LCD permanently,
Do not press the LCD screen with your finger for a long time as this may cause some afterimages,
Some dot defects may appear as Red, Green or Blue spots on the screen, However, this will have no impact or effect on the display performance,
If possible, use the recommended resolution to obtain the best image quality for your LCD display, If used under any mode except the recommended resolution, some scaled or processed images may appear on the screen, However, this is characteristic of the
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause image
Do not shock or scratch the front and sides of the screen with metallic objects, Otherwise, it may cause damage to the screen,
Make sure the panel faces forward and hold it with both hands to move, If you drop the product, the damaged product can cause electric shock or fire, Contact an authorized the service center for repair,
Avoid hightemperatures and humidity,
