LG Electronics WS-2080 5.4 Rain

direction alarm and Direct (wind direction) will begin flashing.

Press the up key or down key to adjust the wind direction alarm.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

5. Wind Speed Record High. Press the enter key to display maximum wind speed record since

the last reset. The maximum record will be flashing, and the MAX icon will light up (in the

tendency section). To reset, press the enter key for 3 seconds, and the maximum value (and

associated date and time) (and associated date and time) will be reset to current reading.

5.4 Rain

Note: This is a continuation of the previous section. To enter this mode, you must begin at

Section 5.1 and proceed to this section.

Press the menu key to enter the Rain Set Mode. You can skip over any setting by selecting the enter

key.

Figure 14

1. Rain Increment. Press the up key or down key to alternate the display between 1 hour, 24

hour, week, month and total rain increments.

2. Rain Units. Press the enter key to set the rain units. The rain units will begin flashing.

Press the up key or down key to alternate the display unit between inches and mm.

Rain High Alarm. Press the enter key to set the rain high alarm function. The rain high

alarm and HI AL (high alarm) will begin flashing.

Press the up key or down key to adjust the rain alarm.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

3. Rain Record High. Press the enter key to display maximum rain record since the last reset.

The maximum record will be flashing, and the MAX icon will light up (in the tendency

section). To reset, press the enter key for 3 seconds, and the maximum value (and associated

date and time) will be reset to current reading.

4. Reset Rain. Press the enter key to reset the rain values. The rain and CLEAR will begin

flashing. To reset, press enter key for 3 seconds and the 1 hour, 24 hour, week, month and

total rain will reset to 0.