LG Electronics WS-2080 6. PC Software

Distance = 4 x (20 – 5)’ = 60’.

Many installations are not perfect and installing the weather station on a roof can be difficult. Thus,

you can calibrate for this error with a wind speed multiplier.

In addition to the installation challenges, wind cup bearings (moving parts) wear over time.

Without a calibrated source, wind speed can be difficult to measure. We recommend using a calibrated

wind meter (available from Ambient Weather) and a constant speed, high speed fan.

While in the Normal Mode, press the ON/OFF key for 8 seconds to enter the calibration mode, and

the ADJ icon will be displayed. You can skip over any setting by selecting the enter key. To exit the

calibration mode at any time, select the history key

1. Wind Speed Calibration (default is 1.0, adjustment range 0.75 to 1.25). Press the up or

down key to increase or decrease the wind speed multiplier to match the calibrated source.

Press the ON/OFF key, and the value will return to the uncalibrated value.

2. Indoor Temperature Calibration. Press the enter key to calibrate the temperature in 0.1°C

(0.18 °F) increments. Press the up or down key to increase or decrease the temperature bias

to match the calibrated source. Press the ON/OFF key, and the value will return to the

uncalibrated value.

3. Indoor Humidity Calibration. Press the enter key to calibrate the humidity in 1%

increments. Press the up or down key to increase or decrease the humidity bias to match the

calibrated source. Press the ON/OFF key, and the value will return to the uncalibrated value.

4. Outdoor Temperature Calibration. Press the enter key to calibrate the temperature in 0.1°

increments. Press the up or down key to increase or decrease the temperature bias to match

the calibrated source. Press the ON/OFF key, and the value will return to the uncalibrated

value.

5. Outdoor Humidity Calibration. Press the enter key to calibrate the humidity in 1%

increments. Press the up or down key to increase or decrease the humidity bias to match the

calibrated source. Press the ON/OFF key, and the value will return to the uncalibrated value.

Press the enter key to exit the calibration mode.

Note: The dew point and wind chill are based on the calibration values.

6. PC Software

Note: EasyWeather software is included with this weather station package. Easy Weather runs on

most PC operating systems. Cumulus is free internet publishing PC software application by

Sandaysoft. WeatherSnoop is a paid software and internet publishing application for Macs by

Tee-Boy.