LG Electronics WS-2080 5.10 Outdoor Temperature, Wind Chill and Dew Point

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

2. Indoor Humidity Low Alarm. Press the enter key to set the indoor humidity low alarm

function. The indoor humidity and LO AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

4. Indoor Humidity Record High. Press the enter key to display maximum indoor humidity

record since the last reset. The maximum humidity record and MAX icon (in the tendency

section) will begin flashing. To reset, press the enter key for 3 seconds, and the maximum

value (and associated date and time) (and associated date and time) will be reset to current

reading.

5. Indoor Humidity Record Low. Press the enter key to display minimum indoor humidity

record since the last reset. The minimum humidity record and MIN icon (in the tendency

section) will begin flashing. To reset, press the enter key for 3 seconds, and the minimum

value (and associated date and time) will be reset to current reading.

5.10 Outdoor Temperature, Wind Chill and Dew Point

Note: This is a continuation of the previous section. To enter this mode, you must begin at

Section 5.1 and proceed to this section.

Figure 19

1. Outdoor Temperature, Wind chill and Dew Point. Press the up key or down key to

alternate the display between the outdoor temperature, wind chill and dew point.

2. Outdoor Temperature Units. Press the up key or down key to alternate the display unit

between °C and °F.

3. Outdoor Temperature High Alarm. Press the enter key to set the outdoor temperature high

alarm function. The outdoor temperature and HI AL (high alarm) will begin flashing.

Press the up key or down key to change the value.