LG Electronics WS-2080 5.9 Indoor Humidity

1. Indoor Temperature Units. Press the up key or down key to alternate the disp lay unit

between °C and °F.

2. Indoor Temperature High Alarm. Press the enter key to set the indoor temperature high

alarm function. The indoor temperature and HI AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

3. Indoor Temperature Low Alarm. Press the enter key to set the indoor temperature low

alarm function. The indoor temperature and LO AL (high alarm) will begin flashing.

Press the up key or down key to change the value.

Press the ON/OFF key to select the alarm on or off (if the alarm is enabled, the alarm icon

will be turned on).

5. Indoor Temperature Record High. Press the enter key to display maximum indoor

temperature record since the last reset. The maximum temperature record and MAX icon (in

the tendency section) will begin flashing. To reset, press the enter key for 3 seconds, and the

maximum value (and associated date and time) (and associated date and time) will be reset to

current reading.

6. Indoor Temperature Record Low. Press the enter key to display minimum indoor

temperature record since the last reset. The minimum temperature record and MIN icon (in

the tendency section) will begin flashing. To reset, press the enter key for 3 seconds, and the

minimum value (and associated date and time) will be reset to current reading.

5.9 Indoor Humidity

Note: This is a continuation of the previous section. To enter this mode, you must begin at

Section 5.1 and proceed to this section.

Press the menu key to enter the INDOOR HUMIDITY Set Mode. You can skip over any setting by

selecting the enter key.

Figure 18

1. Indoor Humidity High Alarm. Press the enter key to set the indoor humidity high alarm

function. The indoor humidity and HI AL (high alarm) will begin flashing.