Select option "2" to change Boot mode settings of the card.
Valid Selections:
------------------
1. Static
2. BootP
3. DHCP
Select Boot Mode:
Your Boot mode setting options are Static, BootP, and DHCP. The card
ships from the factory with DHCP service enabled. DHCP allows the card
to obtain an address dynamically from a DHCP server on your network.
The card also supports BootP dynamic configuration. If you are using
DHCP or BootP you may find want to configure your DHCP or BootP
server with the MAC Address of the card so that the server always
assigns the card a specific address. The MAC Address is printed on a
sticker affixed to the top of the card.
To assign the card a fixed IP address, you need to change the Boot mode
to STATIC and then provide an IP Address, Netmask, and Default Gate-
way.
Network Interface Menu
-----------------------
1: Speed/Duplex Auto
2: Boot mode Static
3: IP Address 126.4.1.102
4: Netmask 255.255.255.0
5: Default Gateway 126.4.1.1
If you have made changes, you need to press "Esc" to return to the Main
Menu and then press "x" to exit and save changes.