Connected Device Information
Clicking between the monitor, contol, configure, and support tabs gives
you access to folder lists on the bottom of the left pane. Although the
folder list changes, depending on the tab selected, the top portion of the
left pane remains constant. In the top or the left pane, connected device
information and connected UPS status is always presented.
The IP address of the card and the Liebert UPS model type is presented
under Connected Device:. In this example, the InOpenComms Web Card
is installed in a UPStation GXT 700VA UPS and has been assigned the
IP address, 126.4.20.92.
The current operating state of the UPS is presented under Connected
Device Status: along with the most serious UPS alarm, if one if present.
For our example above, the UPS is operating normally with the load pro-
tected.