Configure Tab - Making and Saving Configurations
Similar to configuring the card using the Service Terminal, every time you
make a configuration change, the card will have “save and reboot” for that
change to take effect. As you navigate between the card's control web
pages, you will notice that configuration screens include Edit and Save
buttons and a Reinitialization folder. As an example, the screen shot
below shows the edit fields available under the configure tab when you
select the SNMP folder:
The Edit button allows configuration and parameter changes.
Once the Edit button is selected, a Save button will appear in its place.
The Save button can be used at any time during the (re)configuration pro-
cess. Once the Save button is selected, the user will be prompted to rein-
itialize the card, so
that the new set-
tings will take
effect. During this
time, the card is
unavailable on the
network. When this
process begins,
your web browser
may be instructed
to open a new page.