Security
By opening a connection to the OpenComms Web Card, you are able to
do three things. You can Monitor, Configure and Control the UPS.
The card allows any user with access to the network segment on which it
resides to monitor the UPS. This means anyone on the segment can
view the entire contents of the monitor and support tabs.
The card restricts access to the folders in the control and configure tabs.
When a user clicks on a folder, they are prompted for a User Name and
Password.
The factory default User Name is "Liebert" and the Password is "Liebert".
Because this is a well-known username and password, you should
change it as soon as possible. You should change the username and
password as soon as possible. If you have not made this change from
the Service Terminal, you can do so from the Web.