•••••••••••••••••••••••
• When focus mode is set to Manual
Single Area Mode is automatically selected when the focus mode
selector is set to M (manual, page 45).
.....................................................
Set the focus mode selector to M (manual) and rotate the Command Dial while pressing the focus area button to select focus area.
•Single Area Mode
Focus is obtained only at the selected focus area when using the manual focus with Electronic Rangefinder (page 45).
•Rotating the Command Dial while pressing the focus area button changes the display as follows:
[,,]+-+[ 3+-+["] +-+E ] +-+[J
tJ
•Confirm selected focus area in the LCD panel and viewfinder.
47
