Nikon 1714, 1713 instruction manual IiS WS-.6, Button. The display changes as follows

Use the optional remote control to release the camera's shutter from a distance. As with self-timer operation, the remote control can also be used when you want to be in the photograph . You can also use the remote control instead of a cable release to reduce camera shake.

.....................................................

1 Press the ~ remote control button a number of times so ~ (immediate release) or ~ (two-sec. delay release) appears in the LCD panel. (Or, rotate the Command

Ii'S W"S-.6

E::3 [ IJ

Dial while pressing the ~ remote control

button.) The display changes as follows:

• Iii =

G:\9---+~---+~---+ No display J

Self-timer(cancel)

•You can choose to,!elease the shutter either immediately after (i;i) or two sec. after (~) the shutter release button on the remote control unit is

pressed.

•Once remote control operation is set, the camera remains ready to receive a signal from the remote

control unit for 60 sec. If no signal is sent for 60 sec., the remote control mode is canceled and iii or

~disappears from the LCD panel.

•The remote control cannot be operated unless the camera'sshutter can be released (Le. when subject is not in focus with autofocus).

•After the shutter is released, the camera remains ready to receive another signal from the remote control unit for 60 sec.

Ii

~

m

NOTE: Before using remote control

When using the remote control for the first time, make sure to pull out the insulation sheet placed on the battery inside the remote control unit that is set when purchased.

69