Nikon 1714, 1713 instruction manual 107

••••••••••••••••••••••

Autofocus	TIL phase detection, Nikon Multi-CAM900 autofocus module with
	AF-Assist Illuminator (approx. 0.5m-3m or 1.6-9.8 ft.)
	• Detection range: EV -1 to EV 19 (ISO 100, at normal temperature)
Lens servo	AF: Auto-Servo AF: camera automatically chooses Single Servo AF or
	Continuous Servo AF operation according to the subject status, i.e.
	stationary or moving (including directional information).
	• Single Servo AF (focus is locked when the subject is in-focus)
	• Continuous Servo AF (camera continues to focus on a moving
	subject) Focus Tracking with Lock-Onrr>1automatically activated
	by subject'sstatus
	M: Manual focus
Focus area	One of five focus areas can be selected
Focus Area mode	• Dynamic AF Mode with Closest-Subject Priority
	• Dynamic AF Mode
	• Single Area with M focus mode
Metering system	TIL full-aperture exposure metering system
	Three metering systems selectable (limitations with lens used)
	• 3D six-segment Matrix Metering: with 0- or G-type AF Nikkor
	• Six-segment Matrix Metering: with AF Nikkor other than 0- or G-
	type (except AF Nikkor for F3AF and IX-Nikkor), AI-P Nikkor
	• Center-Weighted Metering: automatically selected with Manual
	exposure mode
Metering range	3D Matrix Metering:	EV 1-20

Center-Weighted Metering: EV 1-20

(at normal temperature, ISO 100, f/1.4 lens)

Exposure meter coupling CPU

Exposure Compensation ~osure compensated in ±2 EV range, in 1/2 steps (except in M or

Auto Exposure	Bracketing range: ±2 EV; number of ~ots: three; bracketing
Bracketing	steps: 0.5, 1, 1.5 or 2 EV (except in	or Vari-Program)

Film speed setting • Automatically set to ISO film speed of OX-coded film in use (manual not selectable)

•Film speed range: OX: ISO 25-5000, automatically set to ISO 100 with non-OX-coded film

107