General product information
3.3Equipment Inspection
Upon arrival of the unit, and before unpacking, verify that the labeled equipment matches the Bill of Lading. Inspect all items for visible and concealed damage. Damage should be immediately reported to the carrier and a damage claim filed with a copy sent to Liebert Corporation or to your sales repre- sentative.
3.3.1Recyclable Packaging
All material used to package this unit is recyclable. Please save for future use or dispose of the material appropriately.
R
WARNING
! Risk of
Read all of the following instructions before attempting to move, lift, remove packaging from the unit, or preparing unit for installation.
CAUTION
! Risk of overhead interference. Can damage unit or structure.
The unit may be too tall to fit through a doorway while on the skid. Measure the unit and doorway heights and refer to the installation plans before moving the unit to verify clearances.
CAUTION
! Risk of sharp edges, splinters and exposed fasteners. Can cause personal injury.
Only properly trained personnel wearing appropriate safety headgear, gloves, shoes and glasses should attempt to move, lift, remove packaging from, or prepare unit for installation.
CAUTION
! Risk of damage from forklift. Can cause exterior and/or underside damage. Keep tines of the forklift level and at a height suitable to fit below the skid.
CAUTION
! Risk of hazardous environments. Can cause unit damage.
Keep the unit indoors and protected from dampness, freezing temperatures and contact damage.
Figure 4 Recommended unit handling equipment
Pallet Jack
Forklift
5
