Setting the delay time for the door open alarm
The time before the audible warning signal sounds after the door has been opened can be adjusted.
Press 
for 5 seconds. Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
(minute)
Setting range = 1 - 5 minutes
Use buttons 
and 
to select the desired setting.
Display = 
Press 
for 5 seconds.
The electronic control system will automatically switch back to normal operating mode.
Deactivating the audible warning signal function
The audible warning signal function can be completely deactivated if necessary.
Note
In this case, the sentence stated in these operating instructions "The audible warning signal sounds" must be skipped when reading the section in question.
Press 
for 5 seconds. Display = 
Display = 
Display = 
Display = 
Use buttons 
and 
to select the desired setting.
= audible warning signal function activated
= audible warning signal function deactivated
Display = 
Press 
for 5 seconds.
The electronic control system will automatically switch back to normal operating mode.
GB
Audible warning signal settings
The audible warning signal will be muted for the current alarm after
the button 
has been pressed. Complete the following steps if you want the audible warning signal to reactivate automatically.
Press 
for 5 seconds. Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
Display = 
Automatic reactivation of the audible warning signal is now active. Thetimebeforetheaudiblewarningsignalsoundsagainmustbeset.
Display = 
Display = 
Time in minutes after which the audible warning signal will sound again after the button 
has been pressed. Setting range
= 1 - 120 minutes.
Use buttons 
and 
to select the desired setting.
Display = 
Press 
for 5 seconds.
The electronic control system will automatically switch back to normal operating mode.
17
