Control

If the appliance is installed in a very damp environment, conden- sate may form on the outside of the appliance.

u Always see to good ventilation at the installation site.

wThe interior light is on when the door is open.

wThe temperature display shines. Refrigerator compartment and freezer compartment are switched on.

4.5 Disposing of packaging

WARNING

Danger of suffocation due to packing material and plastic film! u Do not allow children to play with packing material.

The packaging is made of recyclable materials:

-corrugated board/cardboard

-expanded polystyrene parts

-polythene bags and sheets

-polypropylene straps

uTake the packaging material to an official collecting point.

4.6 Connecting the appliance

NOTICE

Risk of damage to the electronic control system!

u Do not use stand-alone inverters (conversion of d.c. to a.c./ three-phase) or energy saving plugs.

WARNING

Fire and overheating hazard!

u Do not use extension cables or multiple socket outlets.

The type of current (alternating current) and voltage at the instal- lation site have to conform with the data on the type plate (see Appliance at a glance).

Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher.

It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emer- gency.

u Check the electrical connection. u Clean the appliance (see 6.2) . u Plug in the power plug.

4.7 Switching on the appliance

Note

u To switch on the entire appliance it is necessary only to switch on the freezer compartment. In so doing, the refrigerator compartment is automatically switched on as well.

Put the appliance into operation about 2 hours before first loading food to be frozen.

4.7.1 Switching on the freezer compartment

uPressOn/Off button, freezer compartment Fig. 3 (9).

The appliance is switched on. The refrigerator compartment temperature display indicates the set temperature. The freezer compartment temperature display and the alarm

button flash until the temperature is sufficiently low.w

4.7.2Switching on the refrigerator compart-

ment

Note

u When the refrigerator compartment is switched on, the freezer compartment is automatically switched on as well.

u Press On/Off button, refrigerator compartment Fig. 3 (1).

5 Control

5.1 Door alarm

For refrigerator and freezer compartment

If the door is open longer then 60 s, the audible alarm sounds. The audible alarm is automatically silenced when the door is closed.

5.1.1 Muting the door alarm

The audible alarm can be muted when the door is open. The sound switch-off function is active as long as the door is left open. u Press alarm button Fig. 3 (8).

w The door alarm is silenced.

5.2 Temperature alarm

The audible alarm sounds if the freezer temperature is not cold enough.

The alarm button flashes at the same time.

The cause of the temperature being too high may be:

-warm fresh food was placed inside

-too much warm ambient air flowed in when rearranging and removing food

-power failure for some time

-the appliance is faulty

The audible alarm is automatically silenced, the alarm button Fig. 3 (8) goes out and the temperature display stops flashing when the temperature is sufficiently cold again.

If the alarm status persists: (see Malfunction).

Note

Food may be spoilt if the temperature is not cold enough.

u Check the quality of the food. Do not consume spoiled food.

5.2.1 Muting the temperature alarm

The audible alarm can be muted. When the temperature is suffi- ciently cold again, the alarm function is active again.

u Press alarm button Fig. 3 (8). w The audible alarm is silenced.

5.3 Refrigerator compartment

The natural circulation of air in the refrigerator compartment results in zones differing in temperature. It is coldest directly above the vegetable drawers and at the rear wall. It is warmest at the top front of the compartment and in the door.

5.3.1 Food refrigeration

Note

The energy consumption increases and the cooling performance decreases if the ventilation is inadequate.

u Always keep the air slits of the fan free.

u Store perishable food such as ready-to-serve dishes, meat products and sausages in the coldest zone. Place butter and preserves in the upper area and in the door (see Appliance at a glance).

u Use recyclable plastic, metal, aluminium and glass containers and cling film for wrapping.

7

Page 6 Page 8
Page 7
Image 7
Liebherr 7084376 - 03 operating instructions Control
Page 6 Page 8

7084376 - 03 specifications

The Liebherr 7084376 - 03 is a cutting-edge component designed to enhance the performance and efficiency of Liebherr's extensive range of machinery. Known for its commitment to innovation, Liebherr integrates advanced features and technologies into its products, making the 7084376 - 03 a notable example of this endeavor.

One of the primary features of the Liebherr 7084376 - 03 is its robust construction, ensuring durability and reliability even in the most demanding working conditions. The material selection is paramount, with high-grade alloys used to withstand wear and tear, ensuring a long service life. This durability translates to reduced maintenance costs and increased uptime for users.

The 7084376 - 03 is equipped with state-of-the-art technologies that enhance its operational capabilities. One such technology is the advanced hydraulic system designed to optimize fluid dynamics. This system not only improves the efficiency of power transmission but also facilitates smoother operation, which is vital in handling heavy loads. Additionally, the hydraulic system is engineered to minimize energy consumption, making the machinery more eco-friendly.

Another significant characteristic of the Liebherr 7084376 - 03 is its innovative control interface. The user-friendly design allows operators to easily navigate through various settings and functionalities, promoting efficient use and quick adjustments as required. The interface is designed with intuitive visuals, ensuring that operators can focus on their tasks without getting bogged down by complex controls.

Moreover, the Liebherr 7084376 - 03 features advanced safety mechanisms. These include overload protection and automated alerts, which help prevent accidents and equipment failure. Safety is a crucial aspect of Liebherr’s design philosophy, and these features are a testament to their commitment to providing safe working environments.

In conclusion, the Liebherr 7084376 - 03 stands as a prime example of Liebherr's dedication to producing high-quality, innovative machinery components. Its robust construction, advanced hydraulic technologies, user-friendly control interface, and comprehensive safety features all contribute to its reputation as a reliable choice for operators. Whether in construction, mining, or other heavy-duty applications, the 7084376 - 03 is engineered to perform, ensuring efficiency and safety in challenging environments. As Liebherr continues to push technological boundaries, components like the Liebherr 7084376 - 03 are essential for achieving peak operational excellence.
Top Page Image Contents