INTEGRATING CABINETRY

Framed Panels - Figure 5

If the thickness of the custom panels is less than 1/4" (6.4 mm), they must be backed up with a sheet of shim material to build the total thickness to 1/4" (6.4 mm). If the panel is thicker than 1/4" (6.4 mm), an edge must be routed around the panel to ensure a proper fit.

1/4"

(6.4 mm)

1/4" (6.4 mm)

IMPORTANT

If you are replacing the factory air vents with an overlay, DO NOT restrict the air flow. The air flow must be the same or greater than the fac- tory air vents of 31 square inches (200 cm²).

The door handles must be installed before the screw covers are installed. If you fail to install the handles before the screw covers, you can damage the covers. The screw covers are taped to the unit doors during shipping. Use care when removing covers.

The door panel weight must not exceed 25 lb (11,3 kg).

22-9/16" (573 mm)

 

 

max. 17-1/2" (445 mm)

 

 

Window cutout

 

37/64"(828mm)

=

=

 

25(648mm)1/2"-

3-1/16" (78mm)

max.

32-

1/4" (6.4 mm)

1/4" (6.4 mm)

37-9/32" (947 mm)

Figure 5

A delight in freshness

8

WFI1051 / EWTN 2956

Page 10
Image 10
Liebherr EWTN installation instructions Integrating Cabinetry, Framed Panels Figure