Liebherr EWTN installation instructions Overlay Panels single install Figure

INTEGRATING CABINETRY

Overlay Panels - single install - Figure 6

The overlay design line allows decorative panels to cover the door trim for a more seamless appear- ance that blends with the design of the room. To achieve this look, the most common way is to work

with three panels, the decorative overlay panel, a 3/32" (2.5 mm) spacer panel and a 1/4" (6.4 mm) backer panel.

Depending on your cabinet manufacturer, this could be one panel routed for different dimensions or, more likely, three different panels.

		W
1	Overlay Panel	=
2	Spacer Panel

3 Backer Panel Approx. 3/4" (19.1mm)

3/32" (2.5mm)

1/4" (6.4mm)

=

Window cutout

=

W H - Winecooler H - Freezer

1 Overlay	23-5/16"	33-5/8"	38"
Panel	(592 mm)	(854 mm)	(965 mm)
2 Spacer	21-3/4"	31-1/2"	36-1/4"			=
Panel	(553 mm)	(800 mm)	(921 mm)	3/8"	(9mm)
3 Backer	22-3/4"	32-37/64"	37-9/32"			=
Panel	(576 mm)	(828 mm)	(947 mm)
Window	max17-1/2"	max 25-1/2"
cutout	(445 mm)	(648 mm)
	IMPORTANT
If you are replacing the factory air vents with an
overlay, DO NOT restrict the air flow. The air flow						=
must be the same or greater than the factory air
vents of 31 square inches (200 cm²).
The door handles must be installed on the
overlay panels before the screw covers are
installed. If you fail to install the handles on
the overlay panels before the screw covers ,
you can damage the covers. The screw covers
are taped to the unit doors during shipping.
Use care when removing covers.
The door panel weight must not exceed
25 lb (11,3 kg).				3/8"	(9mm)	=
		Figure 6
						=

=

=

3-1/16" (78mm)

= H Freezer

=

H Winecooler

A delight in freshness

WFI1051 / EWTN 2956 9