Troubleshooting
IceMaker Troubleshooting
You may be able to correct the following faults yourself:
If you are unable to repair the fault yourself or if the control lamp above the “ON/OFF” button flashes, con- tact our customer service department.
Problem | Possible Cause and Remedy |
|
|
Icemaker cannot be | Is the combined |
turned on. |
|
|
|
Icemaker is not making | - Is the ice maker turned on? |
any ice. | - Is the water supply line open? |
| - Is the ice maker drawer closed properly? |
|
|
Customer Service - Figure 25
If none of the above causes apply and you can- not correct the fault yourself this means there is a fault. Please contact your nearest customer service department (see enclosed list for addresses).
Give the fault number displayed, together with the Type Designation 1,
Service Number 2 and Appliance / serial number 3
as given on the model plate, to ensure prompt, accurate servicing. The model plate is located inside the appliance on the
Leave the appliance closed until the customer ser- vice engineer arrives to prevent any further cold loss.
Appliance Information
Record this information when the appliance is installed.
Type Designation:__________________________
Service Number:___________________________
Appliance / serial number:___________________
Date of Purchase:__________________________
Where Purchased:_________________________
Figure 25
25
