Life Fitness 8215 manual 44 1/2 LOW Height 37 3/8 X 2-3/4 29 1/2 X 7-1/2

44 1/2” LOW HEIGHT
45	5
41
	37 3/8 X 2-3/4”
4	47
	29 1/2 X 7-1/2”
FIGURE 8
STEP 8:

•SECURELY assemble one 1/2” SPRING PIN (47) to the PRESS ARM (4) as shown in FIGURE 8. (IMPORTANT! Tighten spring pin completely.)

•SECURELY assemble the PRESS ARM (4) to the PRESS ARM ADJUST (5) using one 1/2 X 7-1/2” BOLT (29), two 1/2” WASHERS (41), and one 1/2” LOW HEIGHT LOCK NUT (44). (NOTE: SECURELY tighten, then back nut off 1/4 turn to allow the press arm to rotate freely.) See FIGURE 8.

•Pull back on 1/2” SPRING PIN (47) to adjust the PRESS ARM (4) position.

•SECURELY assemble four 3/8 X 2-3/4” BOLTS (37) and four 3/8” LOCK NUTS (45) to the PRESS ARM ADJUST (5) as shown in FIGURE 9.

11