Life Fitness 889 manual Upright Frame Lower Cross Support LOW Height Locknut

	3/8 X 4” 38
	30
	1
	UPRIGHT FRAME
	LOWER CROSS SUPPORT
	3
	21
	2
		30
	3/8”	29
FIGURE 4	LOW HEIGHT
	LOCKNUT

STEP 4:

•NOTE: It may be necessary to loosen the 1/2 X 3-1/4” BOLTS of the LOWER CROSS SUPPORT connecting to the UPRIGHT FRAME before beginning STEP 4.

•SECURELY assemble the STACK BASE (3) and the UPRIGHT (1) to the LOWER CROSS SUPPORT using two 3/8 X 4” BOLTS (38), four 3/8” WASHERS (30), and two 3/8” LOW HEIGHT LOCK NUTS (29). See FIGURE 4.

•Pull back on the SPRING PIN (21) and CAREFULLY insert the ADJ. FOOT SUPPORT (2) into the STACK BASE (3) as shown in FIGURE4.

•Retighten the 1/2 X 3-1/4” BOLTS loosened in the above STEP.

25

STEP 5:		28
• Slide the WEIGHT PLATE SHAFT (39) thru the
		36
hole in the HEAD PLATE (36) and lock in place
using one 3/4” E-RING (25) as shown in FIGURE 5	39	40

• Snap two WEIGHT PLATE BUSHINGS (28) into the top of all twenty WEIGHT PLATES (40) as shown in FIGURE5.

FIGURE 5

6